Mumbai Real Estate Market Report: How It Is Built
Every figure here comes from a locality’s own rates page on asraarealty.com, each with its own “last updated” date. For each locality we track:
- Current asking rate per sq ft (residential, carpet)
- Indicative 1, 2 and 3 BHK price bands
- Indicative rents and approximate rental yield
These are market estimates built from listings and what our team sees on the ground, not official registration figures — those are published by IGR Maharashtra. Use them to compare localities, not as a valuation of a specific flat.
Mumbai Property Rates 2026 by Region
| Region | Localities | Average | Lowest – highest |
|---|---|---|---|
| Mumbai (city and suburbs) | 123 | ₹42,027 | ₹15,350 (Bhayandar East) – ₹1,10,000 (Altamount Road) |
| Thane | 19 | ₹19,250 | ₹6,500 (Diva) – ₹25,000 (Yeoor Hills) |
| Navi Mumbai | 19 | ₹18,974 | ₹8,800 (Taloja) – ₹31,000 (Vashi) |
| Panvel | 6 | ₹13,050 | ₹11,900 (New Panvel East) – ₹14,000 (Kamothe) |
| Vasai-Virar | 8 | ₹9,150 | ₹8,400 (Nalasopara West) – ₹11,500 (Vasai West) |
| Kalyan-Dombivli | 6 | ₹8,942 | ₹7,000 (Ambivli) – ₹10,500 (Kalyan West) |
| Palghar district | 9 | ₹4,267 | ₹3,400 (Mokhada) – ₹5,800 (Palghar) |
Mumbai has by far the widest spread: South Mumbai addresses run more than twice the city average, while Mira Road and Bhayandar at the northern edge sit close to the Thane and Navi Mumbai band. Thane and Navi Mumbai average within a few percent of each other. Kalyan-Dombivli, Vasai-Virar and Palghar district are the most affordable belts in the MMR.
In short, this Mumbai real estate market report shows three bands: South and central Mumbai at the top, Thane and Navi Mumbai in the middle, and the outer belts as the entry point.
Most Expensive and Most Affordable Localities
Most expensive
- Altamount Road — ₹1,10,000
- Malabar Hill — ₹90,000
- Cuffe Parade — ₹87,650
- Nepean Sea Road and Walkeshwar — ₹85,000
- Marine Drive — ₹82,000
Most affordable
- Mokhada — ₹3,400
- Vikramgad — ₹3,500
- Jawhar — ₹3,600
- Diva — ₹6,500
- Ambivli — ₹7,000
Mumbai Rental Yield: Where It Is Highest
| Locality | Approx. gross yield |
|---|---|
| Byculla | 4.9% |
| Mahalaxmi | 4.7% |
| Vikhroli West | 4.5% |
| Jogeshwari West | 4.4% |
| Jogeshwari East | 4.3% |
| Parel | 4.25% |
The yield leaders are central and mid-Mumbai localities, not the most expensive South Mumbai addresses — rents there are lower relative to capital values. Gross yield is before maintenance, tax and vacancy.
Using These Numbers
Keep these points in mind before you act on any rate.
- Compare per sq ft on carpet area, not built-up
- Check registered values for the specific building
- Adjust for floor, age, view and parking
- Check the “last updated” date on each rates page
- Get a free valuation for a specific flat
Mumbai Property Rates: Frequently Asked Questions
What is the average property rate in Mumbai in 2026?
About ₹42,000 per sq ft across the 123 Mumbai localities we track, from ₹15,350 in Bhayandar East to ₹1,10,000 on Altamount Road.
Which is the most affordable region in the MMR?
Palghar district, averaging about ₹4,300 per sq ft, followed by Kalyan-Dombivli and Vasai-Virar at about ₹9,000.
Where is Mumbai rental yield highest?
Byculla, Mahalaxmi and Vikhroli West lead at 4.5–4.9% approximate gross yield.
Are these official government rates?
No. They are market estimates; the government’s minimum values are the ready reckoner (ASR) rates.
How often is this Mumbai real estate market report updated?
Whenever our rates pages are refreshed; each locality page shows its own “last updated” date.
